• Nuevo

Pantalla De Tinta Electronica 6" 800x600 de 2 Colores con HAT p/ Raspberry SPI

2.747,00 $
Cantidad
Últimas unidades en stock

6inch LCD E-Ink Display HAT for Raspberry Pi 800x600 Resolution Black White with IT8951 Controller USB/SPI/I80/I2C Interface

Overview

This is an E-Ink display HAT for Raspberry Pi, 6inch, 800x600 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/STM32)

Specifications

  • Operating voltage: 5V
  • Interface: USB/SPI/I80/I2C
  • Outline dimension: 138.4mm × 101.8mm × 0.954mm
  • Display size: 122.4mm × 90.6mm
  • Dot pitch: 0.153mm × 0.151mm
  • Resolution: 800 × 600
  • Display color: black, white
  • Gray scale: 2-16 (1-4 bit)
  • Full refresh time: <1s
  • Total refresh power: 0.6W(typ.)
  • Total standby power: 0.3W(typ.)
  • Viewing angle: >170°

SPI Pinouts

SYMBOLDESCRIPTION
5V Power input
GND Ground
MISO SPI MISO pin
MOSI SPI MOSI pin
SCK SPI SCK pin
CS SPI chip selection, low active
RST External reset, low active
HRDY Busy status output, low active
BTPTE6RHSPI
2 Artículos