Pantalla De Tinta Electronica 5.83" 600x448 de 3 Colores Amarillo, Blanco y Negro con HAT p/ Raspberry SPI

$2,197.00
Quantity
Last items in stock

5.83inch E-Ink Display HAT Yellow Black White Three-Color Display for Raspberry Pi 600x448 SPI Interface

Overview:

This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features:

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications:

  • Operating voltage: 3.3V~5V
  • Interface: SPI
  • Outline dimension: 125.40mm × 99.50mm
  • Display size: 118.80mm × 88.26mm
  • Dot pitch: 0.198 × 0.197
  • Resolution: 600 × 448
  • Display color: yellow, black, white
  • Grey level: 2
  • Full refresh time: 26s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Interface:

SYMBOLDESCRIPTION
VCC 3.3V~5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active
BTPTE5P83RHSPI3CYWB
2 Items